Re: vmnic Status
Since the script uses the Get-VDSwitch cmdlet to start, it will only report distributed switches.
View ArticleRe: ESXi 4.0 Server Crashed
a.p. wrote: You mentioned a 500GB drive in your initial post, but the output shows a 300GB drive!? Can you confirm it's the 300GB drive which should contain the VMFS datastore?Did you setup the host...
View ArticleRe: How to recover VMFS volume after a RAID controller failure
The reason I asked was to understand whether the original partition type was MBR or GPT and the start sector was 128 or 2048.With the information you provided, take a look at Recovering a lost...
View ArticleRe: HP BIOS/iLO differs from ESXi hardware sensors
CIM is running, and the port enalbed. I would be surprised if this was the issue, because it worked like a charm before the memory error occured.
View ArticleRe: what is difference between hostd, Vpxa and vpxd.
Hi.... VPXD-It is Vcenter Server Service. If this service is stopped then we will not able to connect to Vcenter Server via Vsphere client. VPXA-It is the agent of Vcenter server. also known as mini...
View ArticleRe: ESXi 4.0 Server Crashed
What's important are two things, first the partition type has to be FB (VMFS), and the second thing is the start sector, which has to be 128 for VMFS datastores created with version 4.x. Please take a...
View ArticleClik here to view.
Re: observed IP ranges seen in the networking settings.
What you see in the observed IP ranges depends on the incoming broadcast the vmnic detects. Please taks a look at VMware KB: Observed IP range does not show network in ESX or ESXi which provides some...
View ArticleStaging upgrade to vsphere 5.1
Hello All I am just looking for some advice regarding upgrading my current vsphere 5.0 to vsphere 5.1 I would like to stage the upgrade so I don't have to do every piece during the weekend. What parts...
View ArticleRe: how to create custom Notification or Alarms
thanks for response.My requirement is:I want to trigger some Asynchronous business operations(non blocking calls) from webclient plugin UI and would like to notify user that the operation is completed...
View ArticleRe: NTFS partition to VMFS3
Welcome to the Community, can you please clarify the question? It's certainly possible to convert an existing NTFS (or other) partition into a virtual disk stored on a VMFS datastore, but you cannot...
View ArticleRe: ESXi 4.0 Server Crashed
Its showing me 279 GB space and 278 GB is freeand unable to access datastore1 files on vsphere client
View ArticleRe: How to recover VMFS volume after a RAID controller failure
Ye, i think I have understand why do you ask.In the link you have provided, there are two types or partitions - MBR and GPT (which maybe is from gParted).They say that for legacy MBR disks, fdisk have...
View ArticleRe: Create vCAC entity using vCAC plugin? Issue with LocalDateTime?
I created a workflow with just one scriptable task passing in "vcacHost" as the only parameter - and used your snippet for the scriptable task. However, it fails with the same error as well. See error...
View ArticleRe: too high memory consuption
the memory consumed is a sum of memory used total over a period of time. as Jesse had said the best method of gauging memory would be to use the memory values within the Guest OS. You can also look at...
View ArticleRe: How to recover VMFS volume after a RAID controller failure
1.) The 1 represents the partition number and since it is the only partition on the disk it's 1.2.) The 0 is ok. The type is important in case you would want ort e.g. boot from the partition.3.) No...
View ArticleRe: vmnic Status
Not getting the Get-VDSwitch cmdlet. We have VSphere 4.1 and ESXi 4.1 in our environment. I am not getting the cmdlet in powercli also. I am running PowerCLI 5.1 Release 1 build 793510 on my PC. Please...
View ArticleClik here to view.
Re: Cant change to another View Connection server in the View Module.
I solved it A managed to do a typo in the servername... Over and over again... My bad
View ArticleRe: ESXi 4.0 Server Crashed
Just to confirm. After changing the settings to start sector 128 and to partition type FB, the datastore showed up again with it's label "datastore1" but no files/folders on it? André
View Article